by Terrydew » Sun Jan 14, 2018 12:37 pm
I was working with Dan some time ago to allow for the use of a virtual joystick generated by Vjoy but it got sidetracked and never done. I developed a work around that does what you need. The idea is that you assign a virtual button to the FI bindings then use a program like SpadNext to push the virtual button whenever your yoke/stick/cyclic button are pushed. I problem is that FI recognizes both buttons because it allows for a multiple button binding? This is what Dan was going to fix but never did.
The good news is that FI does not recognize a button release so you program SpadNext to push the virtual button when the yoke/stick button is released. This worked. Getting this setup in the FI bindings easily requires Voice Attack because the release method doesn’t work with the increase/decrease bindings. You get the virtual joystick plugin from the Voice Attack site and set up a voice command to push and release the virtual buttons you need to do the bindings.
It’s to bad Voice Attack is limited to only two joysticks or you could use it for the stick buttons also but you will also need SpadNext.
After everything is setup you can control all of FI bindings with multiple joystick buttons as well as Voice commands.
Terry
I7 6900K
Pascal Titan X
P3D V3.4
Windows 10 64 bit with anniversary update