FlyInside 1.91 Fatal Error X-Plane 11.11r2

Moderators: Tony, Sharkku

FlyInside 1.91 Fatal Error X-Plane 11.11r2

Postby Scoombs27 » Mon Jan 29, 2018 10:41 pm

Fatal Error every time I try to open X-Plane. No add-on's or plug in's in X-Plane. I can get P3D to work just fine, no go with X-Plane. See attached screen shot and crash log.
Attachments
2018-01-29 21_21_11-FlyInside FSX P3D and X-PLANE Message Board • View topic - Crash on start v 1.9..jpg
2018-01-29 21_21_11-FlyInside FSX P3D and X-PLANE Message Board • View topic - Crash on start v 1.9..jpg (22.38 KiB) Viewed 9030 times
error-20180129T211656.txt
(65.37 KiB) Downloaded 580 times
Win10 Pro x64 v1709, i7-7740X 4.30GHz, Nvidia GTX 1080TI, 32GB Ram, Oculus Rift, CV1 FW: 708/34a904e8da, X-Plane 11.11r2, FlyInside 1.91
Scoombs27
 
Posts: 9
Joined: Thu Feb 02, 2017 8:46 pm

Re: FlyInside 1.91 Fatal Error X-Plane 11.11r2

Postby Tony » Tue Jan 30, 2018 6:27 pm

Hmmm strange one, how's the rift plugged ? Direct to the gpu HDMI?
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4924
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: FlyInside 1.91 Fatal Error X-Plane 11.11r2

Postby Scoombs27 » Tue Jan 30, 2018 9:03 pm

Yes, Rift is plugged directly into the HDMI of my 1080TI. I do have a monitor plugged into a separate 1050 GPU. When I open FlyInside the first time I did select VR on 1080 and monitor on 1050. Note, everything works great in P3D. I close P3D, no hardware changes, and try X-Plane, it always crashes immediately after pressing a button on the Welcome to FlyInside screen in VR. It doesn't matter if I wait for X-Plane to completely load or not.
Win10 Pro x64 v1709, i7-7740X 4.30GHz, Nvidia GTX 1080TI, 32GB Ram, Oculus Rift, CV1 FW: 708/34a904e8da, X-Plane 11.11r2, FlyInside 1.91
Scoombs27
 
Posts: 9
Joined: Thu Feb 02, 2017 8:46 pm

Re: FlyInside 1.91 Fatal Error X-Plane 11.11r2

Postby Tony » Wed Jan 31, 2018 1:48 am

I think xp11 doesn't like multi gpu's. Would it be a hassle to disable the 1050 and just try with the ti.
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4924
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: FlyInside 1.91 Fatal Error X-Plane 11.11r2

Postby Scoombs27 » Wed Jan 31, 2018 10:15 am

I can run XP11 with both GPU's without FlyinSide and it does work. On a previous install I had the outside view (three monitors) on one GPU and cockpit view (two monitors) on a second GPU and it did work. I will try disabling the 1050 later this evening anyway and see what happens.
Win10 Pro x64 v1709, i7-7740X 4.30GHz, Nvidia GTX 1080TI, 32GB Ram, Oculus Rift, CV1 FW: 708/34a904e8da, X-Plane 11.11r2, FlyInside 1.91
Scoombs27
 
Posts: 9
Joined: Thu Feb 02, 2017 8:46 pm

Re: FlyInside 1.91 Fatal Error X-Plane 11.11r2

Postby Tony » Wed Jan 31, 2018 1:18 pm

Thanks fella, sounds like a complicated set up. If you are still having problems let me know asap :)
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4924
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: FlyInside 1.91 Fatal Error X-Plane 11.11r2

Postby Scoombs27 » Wed Jan 31, 2018 3:37 pm

It was, but now I just have the Oculus on the 1080 and one monitor on the 1050. I'll try disabling the 1050 in a couple hours and let you know.
Win10 Pro x64 v1709, i7-7740X 4.30GHz, Nvidia GTX 1080TI, 32GB Ram, Oculus Rift, CV1 FW: 708/34a904e8da, X-Plane 11.11r2, FlyInside 1.91
Scoombs27
 
Posts: 9
Joined: Thu Feb 02, 2017 8:46 pm

Re: FlyInside 1.91 Fatal Error X-Plane 11.11r2

Postby Scoombs27 » Sun Feb 04, 2018 4:34 pm

Sorry for the delay in replying. I disabled the 1050 and plugged my monitor and Oculus into the 1080 and XP loads just fine now. Not sure why.
For some reason though the visuals in the Oculus with XP11 are horrible compared to P3D but that's for a different thread. I'm guessing that might not even be a FlyInside issue.
Win10 Pro x64 v1709, i7-7740X 4.30GHz, Nvidia GTX 1080TI, 32GB Ram, Oculus Rift, CV1 FW: 708/34a904e8da, X-Plane 11.11r2, FlyInside 1.91
Scoombs27
 
Posts: 9
Joined: Thu Feb 02, 2017 8:46 pm


Return to General forum *Discontinued* 25th Jan 2019

Who is online

Users browsing this forum: No registered users and 1 guest

cron