Problem testing Flyinside with Oculus Rift CV1 on FSX-SE

All things CV1 and Flyinside related.

Moderators: Tony, Sharkku

Re: Problem testing Flyinside with Oculus Rift CV1

Postby harper » Tue Apr 26, 2016 10:17 am

Windows 10 Pro, Joystick is Saitek AV8R
harper
 
Posts: 21
Joined: Tue Apr 26, 2016 7:26 am

Re: Problem testing Flyinside with Oculus Rift CV1

Postby Tony » Tue Apr 26, 2016 10:33 am

When it freezes again can you look in the FlyInside folder and check if an error log has been generated then upload here for Dan ? The folder is in the same folder area as your FSX config. Will be listed under flyinside and the log.txt will be there.

Tony
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4692
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: Problem testing Flyinside with Oculus Rift CV1

Postby harper » Tue Apr 26, 2016 11:36 am

Yes sir. Here is the log file. Thanks.
Attachments
log.txt
(236.01 KiB) Downloaded 109 times
harper
 
Posts: 21
Joined: Tue Apr 26, 2016 7:26 am

Re: Problem testing Flyinside with Oculus Rift CV1

Postby Tony » Tue Apr 26, 2016 11:41 am

Thank you . With the time difference for Dan in the US give him a little while and he'll look over that for you . Just confirm you are not using DX10 preview mode in FSX? If yes try disabling this feature .

Tony
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4692
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: Problem testing Flyinside with Oculus Rift CV1

Postby harper » Tue Apr 26, 2016 11:44 am

No Direct X 10 Preview. Using stock settings.
harper
 
Posts: 21
Joined: Tue Apr 26, 2016 7:26 am

Re: Problem testing Flyinside with Oculus Rift CV1

Postby Tony » Tue Apr 26, 2016 11:52 am

Last little try mate. In the FlyInside settings page try turning the settings down from ultra to high or even standard then try a restart. Plus did you try fsx and flyinside without the av8r plugged in ?

Tony
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4692
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: Problem testing Flyinside with Oculus Rift CV1

Postby admin » Wed Apr 27, 2016 5:37 pm

This is a strange one for sure, I haven't seen this issue before. So it works well for those 10 seconds, and then just gets you stuck on the "home" screen?

Could you confirm that you aren't running any add-ons?
Your friendly neighborhood developer!
Contact Me: dan@flyinside-fsx.com
admin
Site Admin
 
Posts: 2709
Joined: Tue Feb 06, 2007 8:36 am

Re: Problem testing Flyinside with Oculus Rift CV1

Postby harper » Wed Apr 27, 2016 9:15 pm

Correct. For about 10 seconds I can look around in the cockpit and then I'm hosed up back to the menu.
harper
 
Posts: 21
Joined: Tue Apr 26, 2016 7:26 am

Re: Problem testing Flyinside with Oculus Rift CV1

Postby Tedzeidan » Thu Apr 28, 2016 11:29 am

Hey guys,
I installed the latest flyinside and oculus and graphic card software. When I try to open flyinside, prepar3d opens but then that's it. It doesn't trigger for oculus to work, I just see the oculus home screen. I did check the box that says to allow third party developers.
I also did delete the flyinside log and the prepared 3d and still nothing.
Thabk you

I7
12 gigs ram
Gtx 970
Ssd 500
Tedzeidan
 
Posts: 20
Joined: Thu Apr 28, 2016 11:24 am

Re: Problem testing Flyinside with Oculus Rift CV1

Postby Tony » Thu Apr 28, 2016 12:17 pm

Hi and welcome to flyinside :) is your p3d installed in the default location and is flyinside going to that location ? Also is the hdmi plugged directly into your cv1 ? Where are you trying to run p3d from ? It doesn't work from the home store. Can you open other programs ok? Is it a clean install of p3d or do you have addons enabled? Do you see the Flyinside welcome screen ?

Tony
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4692
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

PreviousNext

Return to Oculus Rift CV1

Who is online

Users browsing this forum: No registered users and 1 guest

cron