How to set resolution?

[slipstream]

I have FSX SE working fine in my rift, but I cannot see how to set the resolution or any other settings. FSX is set to 1024/768 which is obviously wrong. Am I not meant to have a window available whilst in-game to allow me to change stuff? Thanks in advance for any help.

[slipstream]

sorry, which resolution do i select in game and which resolution do i select within fsxinside?

[jimh20]

Set the highest resolution in both which your system will allow. I use 3840x 1024 in FSX/P3D, and the highest setting in Flyinside. That gives me a better view than the lower settings my previous graphics card would allow.

Good Luck, Jim

[MikeT707]

Set the highest resolution in both which your system will allow. I use 3840x 1024 in FSX/P3D, and the highest setting in Flyinside. That gives me a better view than the lower settings my previous graphics card would allow.

Good Luck, Jim

Jim,
I was not aware that the settings in FSX/P3D made any difference in the HMD. I thought the only setting that mattered was the resolution that the user selects in FlyInside. Are you saying that the settings in FSX/P3D do make a difference?
Thanks.

[admin]

Hi All,

The proper way to set resolution is as follows:

• Press your "Interact" button so that the FlyInside Tag appears.
• Look at the big blue "Menu" button and press Interact again.
• Look at "Settings" and press Interact to go to the FlyInside Settings tab.
• Use the interact button on this screen to change the resolution. You want to use FlyInside Settings to change HMD resolution rather than any simulator setting.,

Hope that helps

Thanks,
Dan

[slipstream]

Thanks all. I tried upping the res within fsx only to receive a fatal error, restart. I upped to the max within flyinside which is 3840x 1024 AFAIK, and that made a huge difference to the overall look of the graphics.

I'm wondering now how to set the AA settings? I have AA ticked within FSX, but should I untick now and set within flyinside settings? Which one overrides which??

[jimh20]

Thanks, Dan, for putting us right.

The advice I had from elsewhere was wrong about the Sim setting, sorry. I've now set minimum resolution in P3D, I see no worsening in the Rift, and there appears to be some freeing up of resources.

Cheers, Jim