Flyinside BETA bug report (Applies for 1.6 also)

All things CV1 and Flyinside related.

Moderators: Tony, Sharkku

Flyinside BETA bug report (Applies for 1.6 also)

Postby keem85 » Fri Aug 19, 2016 2:31 am

Hi folks!

Sorry to create a bug thread right before release. But I'll list up what I've noticed with the last beta. I'm using P3Dv3.
-Throttle, Elevator trim, mixture throttle is not working in either A2A or stock Microsoft planes.. You grab the handle, and you see the ghost lever, but it's not possible to use. Cessna 182 is the only plane that let me move the Throttle-lever, but only an inch at a time.. So in reality it's useless. (EDIT: 737 throttle works fine).
-Circle knob is almost never working.. in 1 out of 20-30 times I pinch the knob, the cicrcle appears.. Once it appears, it's not possible to sway around.. Also those few times the circle appears, it appears facing 90 degrees to the left or right..
-A bug with ALL FTX sceneries. When you land on the ground, the 3D depth is off. It looks like you landed on a invisible floor..
-Carenado aero commander.. Can't grab the elevator trim on the roof, can't circle knobs
-Carenado C172, can't grab yoke
-Twin Otter and other airplanes with roof throttle reacts wrong. Forward is backwards and backwards is forwards
-Lancair cockpit interaction does not work. Gaze pointer is not present when hovering over cockpit

Tested A2A Cherokee,, Twin Otter, Carenado Aero Commander Cessnas and stock. Stock 737-800 from Microsoft also. This one with Alejandros cockpit..

I'll add more bugs here, when I find them.
Last edited by keem85 on Mon Aug 22, 2016 4:25 pm, edited 7 times in total.
MOBO: GA-Z87X-UD4H
Processor: i7 4770K @4.4
GFX: MSI 1080 Gaming X
RAM: Corsair Vengeance Pro 2400
OS: Windows 10 x64
Main sim: X-Plane 10

Image
keem85
 
Posts: 300
Joined: Thu Aug 06, 2015 3:05 pm

Re: Flyinside BETA bug report

Postby Britjet » Fri Aug 19, 2016 6:36 pm

Ver 1.6 Beta - I am also a P3DV3 user and the circle doesn't work properly for me. Tried with several different a/c. It just moves slightly. My "hands" seem to be reacting properly in LM.
Also, how about having the +/_ switch fade after a few seconds, unless you want to keep it for a cockpit switch that is awkward with LM? At the moment I have a cockpit full of "stickers"!
Thanks for the update though...:-)
Brit.
Britjet
 
Posts: 48
Joined: Wed Jun 01, 2016 12:15 pm

Re: Flyinside BETA bug report (Applies for 1.6 also)

Postby whitav8 » Mon Aug 22, 2016 12:29 pm

As far as 3D depth being wrong on ORBX sceneries landings, try turning Tessellation off for just a test. (Don't forget you have to restart P3D)
Dave
Intel 9700K@5.0Ghz (8 core) + Nvidia2070(436.15) + P3Dv4.4 + FSX + 0.6 FSS + WMR HP Reverb v2 + Win10 (build 1903) + CAP2 + FS2
whitav8
 
Posts: 98
Joined: Thu Aug 20, 2015 7:29 pm

Re: Flyinside BETA bug report (Applies for 1.6 also)

Postby keem85 » Mon Aug 22, 2016 3:45 pm

In the last update 1.6, every time I click the "interact" button, the mini menu appears.. It's very very annoying.. Is this a bug, or should it be like that?

Also, is it possible to make "bind binacular zoom relative" so that it doesn't affect zoom when it's NOT zoomed?.. I'm zooming in to an instrument, creating a perfect distance, then I zoom out again.. Five minutes later the relative zoom is messed up, because I was touching the axis while flying.. In my opinion, it should only work when in zoom-mode.
MOBO: GA-Z87X-UD4H
Processor: i7 4770K @4.4
GFX: MSI 1080 Gaming X
RAM: Corsair Vengeance Pro 2400
OS: Windows 10 x64
Main sim: X-Plane 10

Image
keem85
 
Posts: 300
Joined: Thu Aug 06, 2015 3:05 pm

Re: Flyinside BETA bug report (Applies for 1.6 also)

Postby admin » Mon Aug 22, 2016 6:13 pm

Thanks for the bug reports all! I'll be addressing these as quickly as I am able, based upon severity.

Keem85, I just sent you an e-mail, so be on the look-out for an e-mail from dan@flyinside-fsx.com
Your friendly neighborhood developer!
Contact Me: dan@flyinside-fsx.com
admin
Site Admin
 
Posts: 2710
Joined: Tue Feb 06, 2007 8:36 am

Re: Flyinside BETA bug report (Applies for 1.6 also)

Postby keem85 » Tue Aug 23, 2016 2:59 am

Thanks.. The tesselation option didn't fix depth problem by the way... Actually, FTX Narvik is the FIRST orbx package that does not have this problem. All other has this problem. Global with Vector and LC a long with FTX Norway and England and Pago Pago
MOBO: GA-Z87X-UD4H
Processor: i7 4770K @4.4
GFX: MSI 1080 Gaming X
RAM: Corsair Vengeance Pro 2400
OS: Windows 10 x64
Main sim: X-Plane 10

Image
keem85
 
Posts: 300
Joined: Thu Aug 06, 2015 3:05 pm


Return to Oculus Rift CV1

Who is online

Users browsing this forum: No registered users and 1 guest

cron