Disable Leap Hands from Grabbing Virtual Yoke

Share your experiences (or not) with Leap Motion

Moderators: Tony, fenflame, Sharkku, Greyman, Bruce_C, Stevil

Disable Leap Hands from Grabbing Virtual Yoke

Postby OneGrumpyDude » Mon Mar 12, 2018 2:41 pm


I've poked around a bit online and in the settings looking for this, but haven't found anything very direct. I like the idea of the virtual (Leap Motion {LM} ) hands (LeapHands?) for interacting with the cockpit but not the virtual yoke. I fly with a stick and the LeapHands keep grabbing onto the virtual yoke. Quite frankly I don't see the point of being able to grab a Virtual Yoke. If your real hands are outside the Leap Camera FOV, then LeapHands can't move the stick/yoke. If I'm flying an Extra 300 and looking at the ceiling... I mean out the top of the canopy, LeapHands are useless! If I'm flying a Cessna and looking at out the side window, LeapHands are useless... etc.

I played around with some settings but didn't see any noticeable difference in behavior. Ideally this would be a setting to simply enable/disable the LeapHands interaction with the virtual yoke entirely.

Any thoughts would be appreciated.

Posts: 2
Joined: Wed Nov 01, 2017 2:41 pm

Re: Disable Leap Hands from Grabbing Virtual Yoke

Postby admin » Tue Mar 13, 2018 4:24 pm

I agree that I prefer just grabbing a real joystick. Some people really like the yoke though, like love it, so it's a feature we need to have ;)

This isn't the easiest tweak to make in the world (we never added it as an explicit feature), but there is a way to fix it. Go into your simulator folder and run "FlyInsideAnnotator.exe" Select the airplane you want from the dropdown at the top. Click on the yoke. You'll see a right-hand pane which hopefully says:
Interaction Type:
Detected: Yoke Part
(Use Detected)

Click on the dropdown and change it to "none"

Click the "Save" button at the bottom. Next time you run the sim, that yoke won't be grabb-able. like I said, it's more of a work-around than a feature, but hopefully that helps for now?

Your friendly neighborhood developer!
Contact Me: dan@flyinside-fsx.com
Site Admin
Posts: 2250
Joined: Tue Feb 06, 2007 8:36 am

Re: Disable Leap Hands from Grabbing Virtual Yoke

Postby OneGrumpyDude » Thu Mar 15, 2018 3:15 pm

Hi Dan,

Thanks for the feedback. Only problem I have is trying to run FlyinsideAnnotater.exe, I get three not found .dll errors...


I un/reinstalled the latest FlyInside (1.92) to no avail. Obviously it's something to do with the Visual C++ runtimes, but figured I'd ask before getting too rambunctious in hunting anything down myself.

Haven't tried un/re-installing FSX. Kind of a pain to do that.

Would be kind of nice to have turning off grabbable yokes as a global on/off in the settings, but a workaround per aircraft is OK. Maybe the only way since yokes/sticks do vary.

I could see maybe liking virtual hands from OVR or Vive controllers on a yoke because they are relative to an exterior reference, but not so much those that require my hands to be in the FOV of a head mounted camera. To each their own, though!

Thanks again,
Posts: 2
Joined: Wed Nov 01, 2017 2:41 pm

Re: Disable Leap Hands from Grabbing Virtual Yoke

Postby chrisb » Fri Mar 30, 2018 11:17 am

same here, annotator getting same errors messages,p3d v4.2
Posts: 9
Joined: Sun Nov 13, 2016 6:13 pm

Return to Leap motion Discussion

Who is online

Users browsing this forum: No registered users and 1 guest