P3Dv4.3 announced by LM - due in JUNE!

Moderators: Tony, Greyman, fenflame, Sharkku, Stevil, Bruce_C

P3Dv4.3 announced by LM - due in JUNE!

Postby CVGridley » Tue Jun 12, 2018 1:41 pm

Hi all,
Based on some info I saw posted which came from a LM podcast, P3Dv4.3 is just around the corner and some VR fixes should be included. Any word on whether an update for Fly-Inside will be shortly behind? I'm probably sticking with v4.2 until FI is patched!

Thanks,
sg
CVGridley
 
Posts: 12
Joined: Tue Oct 17, 2017 2:23 pm

Re: P3Dv4.3 announced by LM - due in JUNE!

Postby Tony » Tue Jun 12, 2018 2:52 pm

If an update is required for compatibility then yes an update will follow ;)
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4497
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: P3Dv4.3 announced by LM - due in JUNE!

Postby Robert » Fri Jun 15, 2018 5:49 am

Hopefully they fix P3D's native VR well enough that we don't even need FlyInside. It's been three months since the Vive Pro hit and while FlyInside works, the resolution is just not what AFS2 or X-Plane do normally/natively.

P3D native is stunning on the Pro but the scale is wrong. Everything is tack sharp though, and easy to read/see with the Pro's increased resolution. I'm sure it’s the same for the Odyssey.

FlyInside has some great features and it’s been a wonderful bit of software, but only supporting the old headsets and not updating for the new stuff has been frustrating.
HTC Vive Pro/P3D/DCS/X-Plane
Orbx FTX Global Base, FTX Global Vector, scenery, airport packs
Robert
 
Posts: 903
Joined: Sun May 17, 2015 8:44 pm
Location: New Mexico

Re: P3Dv4.3 announced by LM - due in JUNE!

Postby CVGridley » Mon Jun 25, 2018 5:29 pm

It's out! Head over to the LM downloads section...
CVGridley
 
Posts: 12
Joined: Tue Oct 17, 2017 2:23 pm

Re: P3Dv4.3 announced by LM - due in JUNE!

Postby ChrisK » Tue Jun 26, 2018 4:41 am

Yes its out :o but when do we get an update to flyinside ? V 1.92 wont run with 4.3 :?
Chris
ChrisK
 
Posts: 20
Joined: Thu Jul 20, 2017 4:35 am

Re: P3Dv4.3 announced by LM - due in JUNE!

Postby Shalomar » Tue Jun 26, 2018 6:34 am

I have updated to 4.3. I removed flyinside.exe the annotattor and one other file. I still get the message "Flyinside requires 4.2".

How do I uninstall Flyinside so I can fly till there is an update?

Donald
Shalomar
 
Posts: 64
Joined: Fri Dec 02, 2016 11:04 pm

Re: P3Dv4.3 announced by LM - due in JUNE!

Postby ChrisK » Tue Jun 26, 2018 8:02 am

Hi shalomar,
you dont need to uninstall anything, just start P3D.exe instead of Flyinside.exe ... thats all ;)
Chris
ChrisK
 
Posts: 20
Joined: Thu Jul 20, 2017 4:35 am

Re: P3Dv4.3 announced by LM - due in JUNE!

Postby brodie4598 » Tue Jun 26, 2018 9:46 am

4.3 worked fine for me on my first launch. I very stupidly then tried to launch FI to see if by some chance it may work and was told my version was not compatible.

Now when I launch P3D without FI, it still tells me I don't have the correct version to launch FlyInside...even though I'm not.

Why can't a developer see the potential here and come up with something better than this same old song and dance that has been essentially abandoned?
brodie4598
 
Posts: 34
Joined: Mon Dec 26, 2016 6:49 pm

Re: P3Dv4.3 announced by LM - due in JUNE!

Postby bgoldi » Wed Jun 27, 2018 10:07 am

I also ran into this issue and was forced to uninstall FlyInside in order to run P3D at all.

Can I suggest the following improvements to FlyInside developer team?
- Unsupported version error be made into a warning, in the case where a newer P3D (unknown to FlyInside) is found. User can choose to try it or quit.
- Prominent notice on this board and on the FlyInside website when a version of P3D is available that is really not compatible.
- FlyInside to work closer with Lockheed Martin to beta-test any upcoming new versions. Imagine a future where Flyinside update is ready in advance of the P3D update... :roll:

Same could apply to X-Plane too, of course.

Please treat this as a priority, it can affects all of your users and will happen with each and every update unless something changes.
bgoldi
 
Posts: 1
Joined: Wed Jun 27, 2018 10:00 am

Re: P3Dv4.3 announced by LM - due in JUNE!

Postby denrainwater » Wed Jun 27, 2018 11:21 am

Tony, any word on when we might expect an updated version of FI for V4.3? The post-release silence is concerning...
Prepar3D 4.3 | i7-6700k OC@4.6GHz | 16 GBs DDR4 3000 RAM | OS, P3D, Pilot's Mesh, Other Addons each installed to separate Samsung EVO SSDs | 2 x EVGA GTX 980Ti (is FI supporting SLI again yet?) | Win 10 Home 64-bit | CV1,
denrainwater
 
Posts: 122
Joined: Fri Oct 02, 2015 3:42 pm

Next

Return to General forum

Who is online

Users browsing this forum: No registered users and 1 guest