FLY INSIDE P3D DONT START

[Johannes]

Hi

When i try to start the P3D,with Fly Inside,i t apperas on screen in a rectangular square,but not inside the Oculus.I can only see the clouds,the Logo and the welcome screen,and that is all that happens.I notice that i got a low fps setting at about 10 fps,but that should not prevent it from starting i hope.

Please help anyone?..Any will be appreciated!


Best regards
Johannes

[Robert]

You should add your system specs and software versions to your signature as that will help diagnose.

Are you running direct or extended mode? Any add-on scenery or utilities?

[Johannes]

Operating System
Windows 7 Home Premium 64-bit SP1
CPU
Intel Core 2 Quad Q9450 @ 2.66GHz 42 °C
Yorkfield 45nm Technology
RAM
4,00GB Dual-Channel DDR2 @ 333MHz (5-5-5-15)
Motherboard
ASUSTeK Computer INC. P5W DH Deluxe (LGA 775) 37 °C
Graphics
Matrox TripleHead2Go Digital Edition (3840x1024@60Hz)
2048MB ATI AMD Radeon HD 7800 Series (Sapphire/PCPartner) 31 °C
Storage
931GB Seagate ST1000DM003-1CH162 ATA Device (SATA) 31 °C
Optical Drives
Optiarc DVD RW AD-7200S ATA Device
DTSOFT Virtual CdRom Device
Audio
High Definition Audio-enhet
P3D VER.2.5
SDK 0.6.0.0 (Direct Mode)


Kind regards
Johannes

[Robert]

Hey Johannes,

I'm not certain on this but the problem could be that you only have 4 GB of RAM. After the OS, drivers, and any other software you have loads, that won't leave a lot for P3D, FlyInside, and the display buffers they both need.

Does P3D run when the DK2 is turned off? Can you turn the settings sliders all the way down and have it start? Basically everything to minimize the memory P3D needs?