HUD disappears when on ground / during takeoff & landing

Moderators: Tony, Sharkku

HUD disappears when on ground / during takeoff & landing

Postby Klaus705 » Wed Oct 03, 2018 2:12 am

Hi,

had P3d v 4.2 on my computer with no issues.
After upgrade to P3d v 4.3 I have an issue with all my airplanes equipped with HUD (PMDG 737NGX, Qualitywings 787, VRS Superbug, Dino Cattaneo Eurofighter & F--14 and so on...)

On runway and when close to ground (see attached pics) the lower part of HUD is not displayed - the lower I am the more isn´t visible. Seems to be cut away exactly at horizon line...
Have many sceneries and other software installed (Orbx, Flytampa etc., shader upgrade etc.) .
Was curious how a new installation of P3d v4 would behave, so I installed a brand new v 4.3 on a brand new windows partition without any 3rd part software: Same issue!
(So it doesn´t seem to be attached to 3rd part software...)
When running P3d v4 in 2d-mode without FlyInside all is ok.

Who may help?

Best Regards Klaus

CPU Intel i7 8700K - GPU NVidia Geforce GTX 1080 Ti - RAM 32gb DDR3 1 TB SSD - OS Win 10 x64 - Simulator Prepar3d v 4.3
Oculus Rift
Attachments
HUD VRS Superbug  Flyinside  - Carrier Landing  lower HUD disappearing.JPG
HUD VRS Superbug Flyinside - Carrier Landing lower HUD disappearing.JPG (21.55 KiB) Viewed 1255 times
HUD VRS Superbug  Flyinside  - Takeoff 1.JPG
HUD VRS Superbug Flyinside - Takeoff 1.JPG (12.83 KiB) Viewed 1255 times
HUD VRS Superbug  Flyinside  - Runway.JPG
HUD VRS Superbug Flyinside - Runway.JPG (14 KiB) Viewed 1255 times
Klaus705
 
Posts: 4
Joined: Tue Oct 02, 2018 4:52 pm

Re: HUD disappears when on ground / during takeoff & landing

Postby Tony » Thu Oct 04, 2018 7:23 am

In the p3d menu do you have tessalation on or off ?
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4648
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: HUD disappears when on ground / during takeoff & landing

Postby Klaus705 » Thu Oct 04, 2018 5:09 pm

Hi,
thank you for the fast reply.
Sorry - Computer is being serviced at the moment, will be up&running again next weekend.
Will look if tesselation is on & answer ASAP .

Best regards
Klaus
Klaus705
 
Posts: 4
Joined: Tue Oct 02, 2018 4:52 pm

Re: HUD disappears when on ground / during takeoff & landing

Postby Klaus705 » Fri Oct 05, 2018 2:55 pm

Hi,

had tesselation factor settings at medium... have just tried all settings from low to ultra - no changes.
Klaus705
 
Posts: 4
Joined: Tue Oct 02, 2018 4:52 pm

Re: HUD disappears when on ground / during takeoff & landing

Postby Tony » Mon Oct 08, 2018 1:23 pm

I'll test as soon as possible ;)
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4648
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: HUD disappears when on ground / during takeoff & landing

Postby brodie4598 » Tue Oct 16, 2018 10:37 pm

brodie4598
 
Posts: 38
Joined: Mon Dec 26, 2016 6:49 pm

Re: HUD disappears when on ground / during takeoff & landing

Postby Klaus705 » Wed Oct 17, 2018 12:00 am

HUD F-18 Superbug - Tree in Line  02.JPG
Trees in front of HUD-Symbology - slightly turned aircraft
HUD F-18 Superbug - Tree in Line 02.JPG (9.66 KiB) Viewed 1144 times
HUD F-18 Superbug - Tree in Line  01.JPG
Trees in front of HUD-Symbology
HUD F-18 Superbug - Tree in Line 01.JPG (10.97 KiB) Viewed 1144 times
Hi again,

just some mor information about the issue...
was flying from Bergen/ Norway with both planes , Quality Wings Boeing 787 and VRS Superbug F-18, taxiing to the runway, when remarking tha the trees beside the runway start covering the HUD the same way as the groung is doing when getting closer to them than a certain given distance.
Hard to get a screenshot of that, but I tried it at least.

Find attached two pics.

Hope it may help...
Kindest regards

Klaus
Klaus705
 
Posts: 4
Joined: Tue Oct 02, 2018 4:52 pm

Re: HUD disappears when on ground / during takeoff & landing

Postby severniae » Wed Oct 17, 2018 5:59 am

I think this is related to the missing prop issue that I have near the ground with the A2A Mustang, and in fact all other aircraft with props.

I've also noticed that effects are somehow 'clipping' when near the ground too.

I'm on the latest version, but have tested with the last two previous versions and see the same thing.
severniae
 
Posts: 37
Joined: Thu Feb 04, 2016 9:40 pm

Re: HUD disappears when on ground / during takeoff & landing

Postby awinwey » Sat Oct 20, 2018 3:57 pm

I've just been on the P3D forum about this very same thing. It appears to be an issue with P3D rather than FlyInside.

No solutions on there yet either....
Cheers

Andy

Platform Specs for reference:
Oculus Rift CV1 + Leap Motion
Saitek X-55 + pro-pedals
i7-4790K @ 4GHz /16GB memory + Nvidia GTX980
OS: W10 v1803
awinwey
 
Posts: 9
Joined: Mon Oct 15, 2018 11:50 am

Re: HUD disappears when on ground / during takeoff & landing

Postby awinwey » Mon Oct 22, 2018 7:34 am

Hi all,

This appears to be a P3D issue as discussed here: https://www.prepar3d.com/forum/viewtopic.php?f=6312&t=130534

Please add your voices to those on the P3D forum so we can get it resolved.

Many thanks

Andy
Cheers

Andy

Platform Specs for reference:
Oculus Rift CV1 + Leap Motion
Saitek X-55 + pro-pedals
i7-4790K @ 4GHz /16GB memory + Nvidia GTX980
OS: W10 v1803
awinwey
 
Posts: 9
Joined: Mon Oct 15, 2018 11:50 am

Next

Return to P3D Bug Reporting Here

Who is online

Users browsing this forum: No registered users and 1 guest

cron