Hi Peter65
Can you tell me how to set resolution to 5120 2880, within the settings_pro_FlyinsideXP_settings.ini file?
You should have a folder similar to this:
"C:\Users\<your name>\AppData\Roaming\FlyInside", and within this a file:
"settings_pro_FlyInside XP_settings.ini"
I recommend that you copy this file somewhere safe should anything that follows go wrong... Once you have a copy, edit the original either with MS's Notepad, or an editor like Notepad++ (suggest you google this if you have not come across it). I have an HTC Vive and so what follows relates to that. I am guessing below what the corresponding line is for a Rift user. If I get this wrong, someone with a Rift can correct this. You want to find the line within the [Graphics] section that says:
Vive Target Resolution = xxxx yyyy
or
(I am guessing for the Rift)
Oculus Target Resolution = xxxx yyyy
The xxxx and yyyy will be the current resolution setting. You want to change xxxx to 5120 and the yyyy to 2880.
So, the line should look like:
Vive Target Resolution = 5120 2880
or (qualified guess for the Rift):
Oculus Target Resolution = 5120 2880
Save the file and start XP as usual. Note that this will take a heavy hit on the graphics and lower fps. You are most likely going to have to reduce some of the graphics settings. However, you should see a noticeable increase in sharpness. I certainly do with the Vive.
If you don't like what you then have, revert to the original file.
Hope this helps...
David