Teaser for the helicopter guys

Moderators: Tony, Sharkku

Teaser for the helicopter guys

Postby Rift Flyer » Mon Oct 31, 2016 3:22 am

The autorotation at the end was ugly but man the AS350 B3 is a handful.

https://youtu.be/r47FTCySjLk
System: Win 10 64bit | i7 7700k @ 5.1ghz | 32gb 3466mhz | Asus Strix 1080ti (388.59)| X-Plane 11.10R3 | FlyinsideXP 1.9
VR: Oculus Rift CV1 | Oculus Touch | Leap
Primary HID: Komodo Simulations cyclic, C-Tek anti torque pedals and collective
Rift Flyer
 
Posts: 217
Joined: Sun Oct 09, 2016 12:14 pm

Re: Teaser for the helicopter guys

Postby blacky75 » Mon Oct 31, 2016 9:16 am

now stop teasing around and get it released!!!!! :D :D

THnx for sharing m8! I'm under FSX in the meantime this soft here gets running with XPX!!!!!! CAN'T WAIT :-)

PS: landing could have been softer, indeed :mrgreen: :mrgreen:
blacky75
 
Posts: 2
Joined: Fri Oct 28, 2016 11:42 am

Re: Teaser for the helicopter guys

Postby Rift Flyer » Mon Oct 31, 2016 10:39 am

Yeah I came in way too hot and was trying not to over speed the rotor. That 350 doesn't like to fly slow even with the doors off. :D
System: Win 10 64bit | i7 7700k @ 5.1ghz | 32gb 3466mhz | Asus Strix 1080ti (388.59)| X-Plane 11.10R3 | FlyinsideXP 1.9
VR: Oculus Rift CV1 | Oculus Touch | Leap
Primary HID: Komodo Simulations cyclic, C-Tek anti torque pedals and collective
Rift Flyer
 
Posts: 217
Joined: Sun Oct 09, 2016 12:14 pm

Re: Teaser for the helicopter guys

Postby MartinW » Tue Nov 01, 2016 5:50 pm

All the tearing and artefacts that are in the other teaser vids appear to be gone in this one so that's looking good :D
System: i7 6700k, 4.2ghz | 32gb DDR4 | GTX1080 | Asus GeneVIII | 500GB M2.SSD | 2TB Hybrid | W1064
VR: Oculus Rift CV1. Leap Motion.
SIM: P3D, FSX, XP11, Saitek Yoke, Throttle & Trim wheel, CH Pro Pedals
MartinW
 
Posts: 140
Joined: Mon Oct 03, 2016 4:22 am
Location: W.Somersrt, UK

Re: Teaser for the helicopter guys

Postby Tony » Tue Nov 01, 2016 7:15 pm

Thats because I cannot record to save my life...... ;) In game is smooth as silk.

Tony
Tony F
Customer Support = contact tony@flyinside-fsx.com
FlyInside Inc.
Tony
 
Posts: 4637
Joined: Sat May 30, 2015 3:20 pm
Location: Rift User

Re: Teaser for the helicopter guys

Postby alvmarti » Wed Nov 02, 2016 9:17 am

Hey Rift, thanks a lot for the vid. I can't wait for the xplane version of flyinside. I've got a couple of questions, if you don't mind. How's the resolution so far? Can you clearly read the instruments? How about the fps drops? Any stuttering? Have you tried the B412 from Trident?
Again, thanks a lot.

Al
alvmarti
 
Posts: 17
Joined: Fri Mar 18, 2016 12:48 pm

Re: Teaser for the helicopter guys

Postby Rift Flyer » Wed Nov 02, 2016 4:33 pm

I just tried the 412 but the engines are stuck at idle! I need to read up on it as my normal throttle axis has no effect. It's not a helicopter that I've done any flying in yet. Main analogue flight instruments are legible as is the smaller clock. Ts and Ps needles and arcs are visible but require leaning in to read the numbers. radios are mostly legible (may need to lean in a little). Switches on the collective head are readable. Centre console and overhead require some leaning to become readable but switch positions are easily visible from normal viewing position. That is with Flyinside oversampling at 4k. I can't see the Garmin much at all but haven't tested the zoom feature yet to check. Performance is work in progress so it would be unfair to comment too much on that yet.
System: Win 10 64bit | i7 7700k @ 5.1ghz | 32gb 3466mhz | Asus Strix 1080ti (388.59)| X-Plane 11.10R3 | FlyinsideXP 1.9
VR: Oculus Rift CV1 | Oculus Touch | Leap
Primary HID: Komodo Simulations cyclic, C-Tek anti torque pedals and collective
Rift Flyer
 
Posts: 217
Joined: Sun Oct 09, 2016 12:14 pm

Re: Teaser for the helicopter guys

Postby alvmarti » Thu Nov 03, 2016 10:53 am

Thanks for your quick reply, Rift!
alvmarti
 
Posts: 17
Joined: Fri Mar 18, 2016 12:48 pm


Return to XP11 Bug Reporting Here *Discontinued* 25th Jan 2019

Who is online

Users browsing this forum: No registered users and 1 guest