Page 4 of 7
Re: Xenviro
Posted:
Wed Dec 28, 2016 6:53 amby Tedmax
While there are some ways to get around the 'mask', it is probably best to go back to xEnviro v1.04 for the time being until either Dan has had a chance to look at it or xEnviro v1.07+ changes it
Re: Xenviro
Posted:
Wed Dec 28, 2016 8:28 amby Stevil
Tedmax wrote:While there are some ways to get around the 'mask', it is probably best to go back to xEnviro v1.04 for the time being until either Dan has had a chance to look at it or xEnviro v1.07+ changes it
True and thanks for that info. I can confirm that xEnviro v1.04 runs fine and without the problems we described in this thread
Re: Xenviro
Posted:
Wed Dec 28, 2016 9:30 amby frankstolp
I found that unticking "upper and lower atmosphere" in Xenviro seems to solve the problem.
At least, I see clouds now. I must say these are not very pretty, the 2D look is overwhelming.. Hopefully this is because of beta and flyinside, not the end-result of clouds with Xenviro and FI. In that case it would be crazy dollars for lousy clouds..
Re: Xenviro
Posted:
Thu Dec 29, 2016 12:37 pmby incontinentia
Any ideas how to get hold of previous versions of xEnviro?
Re: Xenviro
Posted:
Thu Dec 29, 2016 8:09 pmby admin
Thanks all, I'll check out the latest xEnviro update. It's probably going to be bumpy until FlyInside XP, X-Plane, and xEnviro all stabilize a bit, so if you find a version you like, stick with it for now
Re: Xenviro
Posted:
Fri Dec 30, 2016 3:54 amby incontinentia
Great news, thanks Dan and happy Christmas and new year.
Re: Xenviro
Posted:
Fri Dec 30, 2016 5:10 amby Stevil
incontinentia wrote:Any ideas how to get hold of previous versions of xEnviro?
Did you try to contact the guys from xEnviro?
Re: Xenviro
Posted:
Sat Dec 31, 2016 9:44 amby incontinentia
I did, they were really helpful. Still waiting on finding out if I can share the link and will post as soon as I have confirmed.
Edit: Here's the link -
https://drive.google.com/open?id=0B0D7D ... 0V5Q3N3MG8
Re: Xenviro
Posted:
Mon Jan 02, 2017 6:00 pmby frankstolp
Downgrading to Xenviro 1.4 did not make a difference for me..
It seems it's a bug; all is fine (35 fps) on the ground in JFK with a storm, as soon as you pass through the first cloud layer FPS drops to about 11 and oddly enough the world below becomes visable.. Through an overcast cloud layer..
Re: Xenviro
Posted:
Mon Jan 02, 2017 9:02 pmby jtrim1
similar issue with the frame rate drop. I haven't nailed down a cause, but it seems once I've been flying for maybe 10 minutes, frame rate plummets to about 5-7 fps. (Normally 30-35) I do mostly low altitude IFR flying with small airplanes. But it does seem the issue happens once I get up closer to the cloud level.