by frankturley » Tue Oct 23, 2018 5:37 am
I thought I would have a try at building a digital ADF gauge, the output displayed is fine, but doesn't display the decimal value. I then thought I would have a try with firing events, so I added buttons to trigger adjusting the tuning, by hundreds, tens and units. The hundreds and tens work fine, but I get no reaction from ADF_1_INC/DEC or ADF_WHOLE_INC/DEC. If I look at the instrument in the DHC3, the decimal value is displayed. However, the adjustments only seem to be downwards, on the decimal and whole numbers. Is this still work in progress?