P3D v4.5 released today!

Moderators: Tony, Sharkku

P3D v4.5 released today!

Postby hawkpic » Tue Apr 09, 2019 1:24 pm

Are you working on a FI update for P3D v4.5?
Thanks
Windows 10
I7 4790k
16GB Ram
GTX 1080 Ti
P3D v4.3
FlyInside
Saitek: Pro Flight Yoke, Rudder Pedals, Throttle Quadrant, Multi Panel, Radio Panel, and Switch Panel
hawkpic
 
Posts: 8
Joined: Sun Nov 05, 2017 4:15 pm

Re: P3D v4.5 released today!

Postby vtracy » Wed Apr 10, 2019 8:07 am

When I start P3D4.5, I get a message saying: "Sorry, FlyInside P3Dv4 requires prepar3D 4.0-4.3"
It did work with 4.4... can I tweak anything so that it will run with 4.5?
Volker
vtracy
 
Posts: 4
Joined: Tue May 09, 2017 10:13 am

Re: P3D v4.5 released today!

Postby joopje » Wed Apr 10, 2019 1:51 pm

I hope so, I've just bought FI for p3dv4...

It is surprisingly silent in the flyinside message board lately. I fear there is zero development going on for this application...
joopje
 
Posts: 21
Joined: Tue Dec 20, 2016 10:15 am

Re: P3D v4.5 released today!

Postby Badl4ndz » Thu Apr 11, 2019 5:43 pm

The performance in V4.5 is below that of V4.4 at the moment (native). Also VirtualReality.dll had to be patched for Oculus because it was crashing straight to desktop when VR was selected. Stick with V4.4 for the moment is my advice. I'm sure LM will publish an update over the next week or so.
i7-4790k @ 4.0GHz | 32GB DDR3 2133MHz | 970 EVO M.2 Boot Drive | 860 EVO SSD Sim Drive | AORUS GTX 1080 Ti Xtreme Edition 11G | Win 10 Pro 1809 x64 | GeForce 417.01 WHQL | Acer Predator G-Sync 4K | Oculus Rift CV1 | Saitek X52 | T.Flight Rudder Pedals
Badl4ndz
 
Posts: 18
Joined: Mon Oct 10, 2016 1:18 pm
Location: Kingdom of Mercia

Re: P3D v4.5 released today!

Postby vtracy » Fri Apr 12, 2019 3:51 pm

Neither FlyInside nor P3D4.5 ‚native‘ seems to work with Oculus Rift.
FI says „need P3Dv4.4“; P3D4.5 crashes when switched to VR-Oculus.
Which software is responsible?
vtracy
 
Posts: 4
Joined: Tue May 09, 2017 10:13 am

Re: P3D v4.5 released today!

Postby fenflame » Sat Apr 13, 2019 7:35 pm

vtracy wrote:Neither FlyInside nor P3D4.5 ‚native‘ seems to work with Oculus Rift.
FI says „need P3Dv4.4“; P3D4.5 crashes when switched to VR-Oculus.
Which software is responsible?


This is an issue with P3DV4.5. Almost immediately LM released a small patch to care of this. Basically its to replace virtualreality.dll in the main P3D folder with an updated version. You will find this available for download on the LM P3D forum.

I'm sure Dan will update and release a new version of FI as soon as its tested. FI version checks P3D so when a new version comes out it doesn't automatically work but requires Dan to test it first and the add the new version as a valid version once tested. This avoids a bunch of users posting the same issue if there is a compatibility problem should the new version of P2D have any conflicts.

Regards, Alan.
Win10-64, i7-4790K OC to 4.7GHZ, 16GB DDR3, EVGA GTX1070 8GB OC, 1 Monitor , CV1, Saitek Rudder Pedals, CH Eclipse Yoke, P3DV4.5
FI P3DV4 Beta Tester. FlyInside Moderator.
fenflame
 
Posts: 91
Joined: Fri Dec 02, 2016 10:42 pm
Location: A Brit who lives in Salem NH, USA

Re: P3D v4.5 released today!

Postby fenflame » Sat Apr 13, 2019 7:43 pm

hawkpic wrote:Are you working on a FI update for P3D v4.5?
Thanks


Yes Dan is working on it, see my post above.
Win10-64, i7-4790K OC to 4.7GHZ, 16GB DDR3, EVGA GTX1070 8GB OC, 1 Monitor , CV1, Saitek Rudder Pedals, CH Eclipse Yoke, P3DV4.5
FI P3DV4 Beta Tester. FlyInside Moderator.
fenflame
 
Posts: 91
Joined: Fri Dec 02, 2016 10:42 pm
Location: A Brit who lives in Salem NH, USA

Re: P3D v4.5 released today!

Postby vtracy » Sun Apr 14, 2019 5:10 am

Allan, thank you for the clarification - and the reassurance! I was so flabbergasted that ‚my‘ functioning combination of P3D, LI, and LeapMotion all of a sudden did not work anymore... Naturally, I thought it must be my mistake... I was contemplating re-installing the whole software bundle incl. all the ORBX sceneries and the aircraft, again from scratch. Was very frustrated...
Now, I am relaxed again, waiting for your new version. I will install the LM patch immediately.
Keep up the good work!
Volker
vtracy
 
Posts: 4
Joined: Tue May 09, 2017 10:13 am


Return to General forum

Who is online

Users browsing this forum: No registered users and 1 guest

cron